Benutzer-Werkzeuge

Webseiten-Werkzeuge


system_en

System

This driver’s data points provide information on the gateway’s internal system status.

The name of the System device driver is: system
The routing address of the System device driver is: 1
The data point file for the System driver is: system1.txt
The configuration file for global settings of the System driver is: system1.cfg

The System device driver as well as all other gateway drivers following data point definitions are valid:

Type: Description
M Integer value (binary data points, counters) which can/shall only be read by the gateway
S Integer value which can be either read or written by the gateway.
X Floating point value (with decimal place) which can/shall only be read by the gateway
Y Floating point value (with decimal place) which can be either read or written by the gateway.

Addresses are defined like this:

„<datapoint-type>“

Datapoint-Type Range of value Description
info
warning
error
fatal
button
relay
led
temp
freemem
cpuload
button1
button2
button3
sdcarduse
sdcard
mdmstate
mdmmoldo
mdmmoldi
integer
integer
integer
integer
integer
integer
integer
float
integer
integer
integer
integer
integer
float
integer
integer
integer
integer
'Info' level errors
'Warning' level errors
'Normal' level errors
'Fatal' level errors
Contact on UGW-C front panel
Relay on UGW-C front panel
LED on UGW-C front panel
UGW-C internal temperature
Freely available system memory
Current load of CPU in percents
GPI-1 (Pin3) - B2 (PIPAL only)
GPI-2 (Pin4) - B3 (PIPAL only)
GPI-3 (Pin5) - B4 (PIPAL only)
Use of SD card in percents
SD card present
Modem, current state
Modem, minutes of last dial out
Modem, minutes of last dial in

Imprint/Impressum Disclaimer DSGVO/Privacy Policy

system_en.txt · Zuletzt geändert: 25.03.2022 15:55 von oni

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki