Profinet Device Name

A gateway is delivered with the name ugw-micro, so that it fits directly to the Siemens application example and the GSDML file.

Link to application example:

NOTE: The Profinet name of the gateway cannot be changed via the web interface of the gateway. A Profinet chip is, which stores the name internally.

For Profinet, the name should be assigned preferably by the Profinet controller, respectively the corresponding management software. This is usually a Siemens PLC with the management software „Simatic Profinet Step7 V13 (TIA Portal)“.

In the function manual „Profinet with Step7 V16“ chapter „Device name and IP address“ you will find more about this:

Technically the name assignment is done via the DCP protocol, more about this can be found at following links:

Imprint/Impressum Disclaimer DSGVO/Privacy Policy

profinet-name_en.txt · Zuletzt geändert: 13.01.2022 20:30 von oni

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki