Benutzer-Werkzeuge

Webseiten-Werkzeuge


modbus_master_seriell_cfg

Dies ist eine alte Version des Dokuments!


# Modbus Master default configuration file
#
# [MODBUS-MASTER] 
#
# key                type    description
#
# Baudrate           int     Baudrate (300,600,1200,2400,4800,9600,19200,38400,57600,115200)
# Databits           int     Databits (7,8)
# Parity             string  Parity (no,odd,even)
# Stopbits           int     Stopbits (1,2)
# Bustype            string  Bustype (RS232, RS485)
# Protocol           string  Protocol (RTU,ASCII)
# Timer              int     Polltimer in ms (50...20000)
# BitCount           int     max number of bits in coils datagram (1...2048)
# WordCount          int     max number of words in datagram (1...128)
# RelaxedErrors      int     activate relaxed error handling (0,1)
# ResponseTimeout    int     response timeout in seconds (1..10)
# SlaveMaxErrorCount int     after this number of errors a slave will be marked as bad (1..1000)
# InitValue          int     value for unitialized values, if RelaxedErrors is active (0..255)
# ForceMultiWrite    int     use function 15/16 for writes (0=off, 1=coils+holdings, 2=only coils, 4=only holdings)

[MODBUS-MASTER]
Baudrate = 9600
Databits = 8
Parity = no
Stopbits = 1
Bustype = RS485
Protocol = RTU
Timer = 100
BitCount = 255
WordCount = 64
RelaxedErrors = 1
ResponseTimeout = 4
SlaveMaxErrorCount = 30
InitValue = 255
FrameTimeout = 1000
ForceMultiWrite = 0
modbus_master_seriell_cfg.1567690888.txt.gz · Zuletzt geändert: 05.09.2019 13:41 von joe