Benutzer-Werkzeuge

Webseiten-Werkzeuge


modbus_master_seriell_cfg

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

modbus_master_seriell_cfg [17.08.2015 18:34] (aktuell)
Michael Hübbers angelegt
Zeile 1: Zeile 1:
 +<​code>​
 +# Modbus Master default configuration file
 +#
 +# [MODBUS-MASTER] ​
 +#
 +# key                type    description
 +#
 +# Baudrate ​          ​int ​    ​Baudrate (300,​600,​1200,​2400,​4800,​9600,​19200,​38400,​57600,​115200)
 +# Databits ​          ​int ​    ​Databits (7,8)
 +# Parity ​            ​string ​ Parity (no,​odd,​even)
 +# Stopbits ​          ​int ​    ​Stopbits (1,2)
 +# Bustype ​           string ​ Bustype (RS232, RS485)
 +# Protocol ​          ​string ​ Protocol (RTU,ASCII)
 +# Timer              int     ​Polltimer in ms (50...20000)
 +# BitCount ​          ​int ​    max number of bits in coils datagram (1...2048)
 +# WordCount ​         int     max number of words in datagram (1...128)
 +# RelaxedErrors ​     int     ​activate relaxed error handling (0,1)
 +# ResponseTimeout ​   int     ​response timeout in seconds (1..10)
 +# SlaveMaxErrorCount int     after this number of errors a slave will be marked as bad (1..1000)
 +# InitValue ​         int     value for unitialized values, if RelaxedErrors is active (0..255)
 +# ForceMultiWrite ​   int     use function 15/16 for writes (0=off, 1=coils+holdings,​ 2=only coils, 4=only holdings)
  
 +[MODBUS-MASTER]
 +Baudrate = 9600
 +Databits = 8
 +Parity = no
 +Stopbits = 1
 +Bustype = RS485
 +Protocol = RTU
 +Timer = 100
 +BitCount = 255
 +WordCount = 64
 +RelaxedErrors = 1
 +ResponseTimeout = 4
 +SlaveTimeout = 300
 +SlaveMaxErrorCount = 30
 +InitValue = 255
 +FrameTimeout = 1000
 +ForceMultiWrite = 0
 +</​code>​
modbus_master_seriell_cfg.txt · Zuletzt geändert: 17.08.2015 18:34 von Michael Hübbers