Benutzer-Werkzeuge

Webseiten-Werkzeuge


modbus_master_serial_en

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

Beide Seiten, vorherige Überarbeitung Vorherige Überarbeitung
modbus_master_serial_en [19.01.2017 16:13]
fla
modbus_master_serial_en [19.06.2020 09:35] (aktuell)
fka
Zeile 59: Zeile 59:
  
 With <​format>​ as: With <​format>​ as:
 +
 +^<​format> ​ ^Beschreibung ​ ^^
 +
 +^d  |64bit IEEE754 floating point (Fliesskommazahl) ​ |
 +^dm  |64bit IEEE754 floating point (Bytereighenfolge vertauscht) ​ |
 +^bcd  |16bit BCD  |
 +^sbit06 ​ |1bit Einzelbit aus Holding oder Input Register. Erfordert die Angabe von <bit> in der Adresse. Zum schreiben wird Funktionscode 06 bzw. 05 verwendet. ​ |
 +^sbit16 ​ |1bit Einzelbit aus Holding oder Input Register. Erfordert die Angabe von <bit> in der Adresse. Zum schreiben wird Funktionscode 16 bzw. 15 verwendet. ​ |
  
 ^<​format> ​ ^Description ​ ^ ^<​format> ​ ^Description ​ ^
Zeile 65: Zeile 73:
 ^uh  |16bit unsigned / 100 (gain two decimal places) ​ | ^uh  |16bit unsigned / 100 (gain two decimal places) ​ |
 ^um  |16bit unsigned / 1000 (gain three decimal places) | ^um  |16bit unsigned / 1000 (gain three decimal places) |
-^u32  |32bit unsigned ​ | 
-^u32s  |32bit unsigned (word order inverted) ​ | 
 ^s  |16bit signed ​ | ^s  |16bit signed ​ |
 ^st  |16bit signed / 10 (gain one decimal place) ​ | ^st  |16bit signed / 10 (gain one decimal place) ​ |
Zeile 76: Zeile 82:
 ^ch  |32bit signed / 100 (gain two decimal places) ​   | ^ch  |32bit signed / 100 (gain two decimal places) ​   |
 ^cm  |32bit signed / 1000 (gain three decimal place) ​  | ^cm  |32bit signed / 1000 (gain three decimal place) ​  |
 +^u32  |32bit unsigned ​ |
 +^u32s  |32bit unsigned (word order inverted) ​ |
 +^u64  |64bit integer unsigned ​ |
 ^f  |32bit IEEE754 floating point| ^f  |32bit IEEE754 floating point|
 ^fi  |32bit IEEE754 floating point (byte order inverted) ​ | ^fi  |32bit IEEE754 floating point (byte order inverted) ​ |
 +^j  |32bit IEEE754 floating point (word order inverted) ​ |
 +^ji  |32bit IEEE754 floating point (word and byte order inverted) ​ |
 +^d  |64bit IEEE754 floating point  |
 +^dm  |64bit IEEE754 floating point (byte order inverted) ​ |
 ^bcd  |16bit BCD  | ^bcd  |16bit BCD  |
 ^sbit06 ​ |1bit single bit from holding or input register. Requires <bit> in the address. For writing 06 resp. 05 is used.  | ^sbit06 ​ |1bit single bit from holding or input register. Requires <bit> in the address. For writing 06 resp. 05 is used.  |
modbus_master_serial_en.txt · Zuletzt geändert: 19.06.2020 09:35 von fka