Benutzer-Werkzeuge

Webseiten-Werkzeuge


geberit_en

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

Beide Seiten, vorherige Überarbeitung Vorherige Überarbeitung
geberit_en [27.02.2019 13:36]
mwe
geberit_en [05.12.2019 13:21] (aktuell)
sdi
Zeile 12: Zeile 12:
 ^Type  ^Description ​ ^ ^Type  ^Description ​ ^
 ^  M  |Integer value (binary data points, counters) which can/shall only be read by the gateway ​ | ^  M  |Integer value (binary data points, counters) which can/shall only be read by the gateway ​ |
-^  S  |Integer value which can be either read or written by the gateway. ​(to M-BUS writing is not possible)  ​|+^  S  |Integer value which can be either read or written by the gateway. |
 ^  X  |Floating point value (with decimal place) which can/shall only be read by the gateway ​ | ^  X  |Floating point value (with decimal place) which can/shall only be read by the gateway ​ |
-^  Y  |Floating point value (with decimal place) which can be either read or written by the gateway. ​(to M-BUS writing is not possible)  ​|+^  Y  |Floating point value (with decimal place) which can be either read or written by the gateway. |
 ^  A  |String, is used e.g. with BACnet Trends and ESPA4.4.4 data points ​ | ^  A  |String, is used e.g. with BACnet Trends and ESPA4.4.4 data points ​ |
  
Zeile 395: Zeile 395:
 ^Name: ​ ^Typ  ^Beschreibung^ ^Name: ​ ^Typ  ^Beschreibung^
 ^Baudrate ​        ​|int ​    ​|Baudrate (300,​600,​1200,​2400,​4800,​9600,​19200,​38400,​57600,​115200)| ^Baudrate ​        ​|int ​    ​|Baudrate (300,​600,​1200,​2400,​4800,​9600,​19200,​38400,​57600,​115200)|
-^Databits ​        ​|int ​    |Datenbits ​(7,8)| +^Databits ​        ​|int ​    |Databits ​(7,8)| 
-^Parity ​          ​|string ​ |Paritaet ​(no,​odd,​even)|+^Parity ​          ​|string ​ |Parity ​(no,​odd,​even)|
 ^Stopbits ​        ​|int ​    ​|Stopbits (1,2)| ^Stopbits ​        ​|int ​    ​|Stopbits (1,2)|
-^Bustype ​         |string ​ |Bustyp ​(RS232, RS485)|+^Bustype ​         |string ​ |Bustype ​(RS232, RS485)|
 ^StandAlone ​      ​|int ​    |1 (1 participant) or 0 (up to 32 participants)| ^StandAlone ​      ​|int ​    |1 (1 participant) or 0 (up to 32 participants)|
-^PollInterval ​    ​|int ​    ​|Pollintervall in Sekunden ​(1-3600)| +^PollInterval ​    ​|int ​    ​|Pollintervall in seconds ​(1-3600)| 
-^ResponseTimeout ​ |int     ​|Timeout in Sekunden für die Antwort von Server ​(1-10)| +^ResponseTimeout ​ |int     ​|Timeout in seconds for an answer by the server ​(1-10)| 
-^SendRetries ​     |int     |Anzahl an Wiederholungen bevor Kommando mit Fehler beendet wird (0-10)|+^SendRetries ​     |int     |Amount of retries for a command to fail (0-10)|
 \\ \\
  
-=== Beispiel ​geberit1.cfg-Datei: ===+=== Example ​geberit1.cfg-File: ===
  
 [GEBERIT]\\ [GEBERIT]\\
geberit_en.txt · Zuletzt geändert: 05.12.2019 13:21 von sdi