Benutzer-Werkzeuge

Webseiten-Werkzeuge


eib_knx_en

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

Beide Seiten, vorherige Überarbeitung Vorherige Überarbeitung
eib_knx_en [17.02.2017 18:46]
Michael Hübbers
eib_knx_en [17.07.2017 16:56] (aktuell)
Jochen Erwied
Zeile 3: Zeile 3:
 The EIB/KNX driver allows reading, writing, and creating KNX data points. The EIB/KNX driver allows reading, writing, and creating KNX data points.
 The driver can either access existing data points as well as provide own local data points on the gateways itself. The driver can either access existing data points as well as provide own local data points on the gateways itself.
 +
 +For gateways with an integrated KNX interface, setting the physical address (per default 15.15.255) to any allowed address can be accomplished using the webfrontend.
  
 In order to achieve current values for all data points after booting the gateway it is necessary to set the reading-flag on the ETS side.  In order to achieve current values for all data points after booting the gateway it is necessary to set the reading-flag on the ETS side. 
eib_knx_en.txt · Zuletzt geändert: 17.07.2017 16:56 von Jochen Erwied