Benutzer-Werkzeuge

Webseiten-Werkzeuge


dali6t.txt

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

dali6t.txt [24.11.2017 08:01]
hoe angelegt
dali6t.txt [24.11.2017 08:04]
hoe
Zeile 1: Zeile 1:
-# default data points for Drv.dali+# default data points for Drv.dali\\
  
-# 64 control gear short addressrange [0..63] +# 64 control gear short addressrange [0..63]\\ 
-# 16 control gear group addressrange [0..15] +# 16 control gear group addressrange [0..15]\\ 
-# 16 scenes  index        [1.16]+# 16 scenes  index                    [1.16]\\
  
-# type:  +# type: \\ 
-# failure DALI HAL-driver communication failure +# failure DALI HAL-driver communication failure\\ 
-# gearshort    controlgear datapoint with short address +# gearshort    controlgear datapoint with short address\\ 
-# geargroup    controlgear datapoint with group address +# geargroup    controlgear datapoint with group address\\ 
-# gearbroadcast  controlgear datapoint with broadcast address +# gearbroadcast  controlgear datapoint with broadcast address\\ 
-+#\\ 
-# value-type: +# value-type:\\ 
-#   switch:      Schalter der Lampe:  ( 0: Aus, 1: An )    (Binary) +#   switch:      Schalter der Lampe:  ( 0: Aus, 1: An )    (Binary)\\ 
-#   level:       Lichtwert der Lampe: ( 0..100% )          (Analog) +#   level:       Lichtwert der Lampe: ( 0..100% )          (Analog)\\ 
-#   scene:       Szene aufrufen:    ( 1..16 )             (int) +#   scene:       Szene aufrufen:    ( 1..16 )             (int)\\ 
-#   gearfailure: Fehlerstatus der Betriebgerät:         ( 0: O.K. 1: Fehler) (Binary) +#   gearfailure: Fehlerstatus der Betriebgerät:         ( 0: O.K. 1: Fehler) (Binary)\\ 
-#   lampfailure: Fehlerstatus der Lampe: ( 0: O.K. 1: Fehler) (Binary) +#   lampfailure: Fehlerstatus der Lampe: ( 0: O.K. 1: Fehler) (Binary)\\ 
-#   failure:     Erreichbarkeit der Lampe: ( 0: n.E. 1: Erreichbar) (Binary) +#   failure:     Erreichbarkeit der Lampe: ( 0: n.E. 1: Erreichbar) (Binary)\\ 
-+#\\ 
-# address:  0..63  (64) +# address:  0..63  (64)\\ 
-# format:   +# format:  \\ 
-#          T:X   polling time factor  ( X * Pollingtime)    +#          T:X   polling time factor  ( X * Pollingtime)   \\ 
-#            0:  no polling+#            0:  no polling\\
  
-#------------------------------------------------------------------------------------- +#-------------------------------------------------------------------------------------\\ 
-# failure datapoint +# failure datapoint\\ 
-[M 0 failure] +[M 0 failure]\\ 
-format = T:5 +format = T:5\\ 
-query = pe +query = pe\\ 
-name = DALI Hardware failure+name = DALI Hardware failure\\
  
-[M 1 failure] +[M 1 failure]\\ 
-format = T:10 +format = T:10\\ 
-query = pe +query = pe\\ 
-name = DALI Channel-1 failure+name = DALI Channel-1 failure\\
  
-[M 2 failure] +[M 2 failure]\\ 
-format = T:10 +format = T:10\\ 
-query = pe +query = pe\\ 
-name = DALI Channel-2 failure+name = DALI Channel-2 failure\\
    
-#--------------------------- Channel - 1 -------------------------------------------------- +#--------------------------- Channel - 1 --------------------------------------------------\\ 
-# control gear  datapoints+# control gear  datapoints\\
  
-[S 1 gearshort 1 switch] +[S 1 gearshort 1 switch]\\ 
-name = LED 1 (ON/OFF) +name = LED 1 (ON/OFF)\\ 
-query = pe +query = pe\\ 
-format = T:0+format = T:0\\
  
-[S 1 gearshort 1 scene] +[S 1 gearshort 1 scene]\\ 
-name = LED 1 goto scene +name = LED 1 goto scene\\ 
-query = pe +query = pe\\ 
-format = T:0+format = T:0\\
  
-[Y 1 gearshort 1 level] +[Y 1 gearshort 1 level]\\ 
-name = LED 1 actual level +name = LED 1 actual level\\ 
-query = pe +query = pe\\ 
-format = T:0+format = T:0\\
  
-[M 1 gearshort 1 failure] +[M 1 gearshort 1 failure]\\ 
-name = LED 1 communication failure +name = LED 1 communication failure\\ 
-query = pe +query = pe\\ 
-format = T:1+format = T:1\\
  
-[M 1 gearshort 1 gearfailure] +[M 1 gearshort 1 gearfailure]\\ 
-name = LED 1 gear failure +name = LED 1 gear failure\\ 
-query = pe +query = pe\\ 
-format = T:1+format = T:1\\
  
-[M 1 gearshort 1 lampfailure] +[M 1 gearshort 1 lampfailure]\\ 
-name = LED 1 lamp failure +name = LED 1 lamp failure\\ 
-query = pe +query = pe\\ 
-format = T:1+format = T:1\\
  
-#--------------------------- Channel - 2 --------------------------------------------------+#--------------------------- Channel - 2 --------------------------------------------------\\
 # control gear  datapoints # control gear  datapoints
  
-[S 2 gearshort 0 switch] +[S 2 gearshort 0 switch]\\ 
-name = LED 0 (ON/OFF) +name = LED 0 (ON/OFF)\\ 
-query = pe +query = pe\\ 
-format = T:10+format = T:10\\ 
 + 
 +[S 2 gearshort 0 scene]\\ 
 +name = LED 0 goto scene\\ 
 +query = pe\\ 
 +format = T:0\\
  
-[2 gearshort 0 scene+[2 gearshort 0 level]\\ 
-name = LED 0 goto scene +name = LED 0 actual level\\ 
-query = pe +query = pe\\ 
-format = T:0+format = T:10\\
  
-[2 gearshort 0 level+[2 gearshort 0 failure]\\ 
-name = LED 0 actual level +name = LED 0 communication failure\\ 
-query = pe +query = pe\\ 
-format = T:10+format = T:10\\
  
-[M 2 gearshort 0 failure+[M 2 gearshort 0 gearfailure]\\ 
-name = LED 0 communication failure +name = LED 0 gear failure\\ 
-query = pe +query = pe\\ 
-format = T:10+format = T:10\\
  
-[M 2 gearshort 0 gearfailure+[M 2 gearshort 0 lampfailure]\\ 
-name = LED 0 gear failure +name = LED 0 lampfailure\\ 
-query = pe +query = pe\\ 
-format = T:10+format = T:10\\
  
-[M 2 gearshort 0 lampfailure] 
-name = LED 0 lampfailure 
-query = pe 
-format = T:10 
dali6t.txt.txt · Zuletzt geändert: 24.11.2017 08:04 von hoe