Benutzer-Werkzeuge

Webseiten-Werkzeuge


clino_eng

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

clino_eng [04.01.2016 15:50] (aktuell)
Frank Lahnor angelegt
Zeile 1: Zeile 1:
 +====== Clino Opt 99 ======
 +
 +The Clino Opt driver allows reading values from a message center via RS-232 interface.
 +
 +The name of the first Clino driver is: //clino//\\
 +The routing address of the first Clino driver is: //1330//\\
 +The data point file of the first Clino driver is: //​clino1.txt//​\\
 +The configuration file for global settings of the first Clino driver is: [[clino_cfg|clino1.cfg]]
 +
 +The Clino Opt 925 driver following definitions for data points are valid. ​
 +
 +^Type  ^Description ​ ^
 +^M |Integer value (Binary data points, values) that can only be read by the gateway. ​ |
 +^S |Integer value (Binary data points, values) that can only be read and written by the gateway. ​ |
 +
 +
 +Addresses are defined as follows:
 +
 +"<​type>​ <​token>"​
 +
 +
 +^Parameter ​ ^Range of values ^Description^
 +^<​type> ​  ​|state,​\\ cmd  |Message from message center\\ message to message center |
 +^<​token>​ |  |Status/​control function for state/cmd |
 +
 +
 +The state of call will be stated in ClinoX.txt as follows:
 +
 +[M state WAIT]
 +
 +\\ === Status-Token ===
 +
 +^Token ^Description ​ ^
 +^GESPR. ​ |conversation ​ |
 +^STOER. ​ |failure call  |
 +^AW1     ​|Presence 1  |
 +^AW2     ​|Presence 2  |
 +^WARTEN ​ |waiting call  |
 +^ESSEN ​  |call for meal  |
 +^PERSON ​ |call for staff|
 +^TELEF. ​ |telephone call|
 +^STECK. ​ |connector failure call  |
 +^NORMAL ​ |standard call  |
 +^BAD-WC ​ |call from restroom |
 +^NOTBAD ​ |emergency call from restroom|
 +^NOTRUF ​ |emergency call |
 +^DIA     ​|diagnostics call|
 +^PRIORI ​ |priority call|
 +^ARZT    |call doctor ​ |
 +
 +\\ === Control function token ===
 +
 +^Token ^Description ​ ^
 +^UHR |set clock|
 +
  
clino_eng.txt · Zuletzt geändert: 04.01.2016 15:50 von Frank Lahnor