Benutzer-Werkzeuge

Webseiten-Werkzeuge


bacnet_en

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

Beide Seiten, vorherige Überarbeitung Vorherige Überarbeitung
bacnet_en [11.09.2015 15:43]
Frank Lahnor
bacnet_en [11.09.2015 15:44] (aktuell)
Frank Lahnor
Zeile 10: Zeile 10:
  
 ^Type  ^Description ​ ^ ^Type  ^Description ​ ^
-^M  |Integer value (binary data points, counters) which can/shall only be read by the gateway ​ | + M  |Integer value (binary data points, counters) which can/shall only be read by the gateway ​ | 
-^S  |Integer value which can be either read or written by the gateway. (to M-BUS writing is not possible) ​ | + S  |Integer value which can be either read or written by the gateway. (to M-BUS writing is not possible) ​ | 
-^X  |Floating point value (with decimal place) which can/shall only be read by the gateway ​ | + X  |Floating point value (with decimal place) which can/shall only be read by the gateway ​ | 
-^Y  |Floating point value (with decimal place) which can be either read or written by the gateway. (to M-BUS writing is not possible) ​ | + Y  |Floating point value (with decimal place) which can be either read or written by the gateway. (to M-BUS writing is not possible) ​ | 
-^A  |String, is used e.g. with BACnet Trends and ESPA4.4.4 data points ​ |+ A  |String, is used e.g. with BACnet Trends and ESPA4.4.4 data points ​ |
  
 Addresses are defined as follows: Addresses are defined as follows:
bacnet_en.txt · Zuletzt geändert: 11.09.2015 15:44 von Frank Lahnor