Benutzer-Werkzeuge

Webseiten-Werkzeuge


bacnet_analog_dp

BACnet Analog Datenpunkte

Analog Input

Die required properties eines AI werden wie folgt definiert:

bac_units = 95

Die optional properties eines AI werden wie folgt definiert:

bac_description = Analog-Input 1
bac_resolution = 0.001
bac_cov_increment = 0.1
bac_min_pres_value = -100.0
bac_max_pres_value = 100.0
bac_time_delay = 0
bac_high_limit = 80.0
bac_low_limit = 5.0
bac_deadband = 0.6
bac_limit_enable = (1,1)
bac_event_enable = (1,1,1)
bac_notify_type = event
bac_notification_class = 1

Ein lokaler AI könnte demnach z.B. so definiert sein:

[Y 2000.AI 1]
 name = Name vom AI 1
 query = pe
 writecache = yes
 bac_units = 95
 bac_description = Analog-Input 1
 bac_resolution = 0.001
 bac_cov_increment = 0.1
 bac_min_pres_value = -100.0
 bac_max_pres_value = 100.0
 bac_time_delay = 0
 bac_high_limit = 80.0
 bac_low_limit = 5.0
 bac_deadband = 0.6
 bac_limit_enable = (1,1)
 bac_event_enable = (1,1,1)
 bac_notify_type = event
 bac_notification_class = 1

Analog Output

Die required properties eines AO werden wie folgt definiert:

bac_units = 95

Die optional properties eines AO werden wie folgt definiert:

bac_description = analog output 1
bac_resolution = 0.0
bac_cov_increment = 0.01
bac_min_pres_value = -10.0
bac_max_pres_value = 7000000.0
bac_time_delay = 0
bac_high_limit = 6000000.0
bac_low_limit = -5.0
bac_deadband = 2.0
bac_limit_enable = (1,1)
bac_event_enable = (1,1,1)
bac_notify_type = alarm
bac_notification_class = 2
bac_relinquish_default = 20.0 -V

Ein lokaler AO könnte demnach z.B. so definiert sein:

[X 2000.AO 1]
 name = Name vom AO 1
 query = pe
 writecache = yes
 bac_units = 95
 bac_description = analog output 1 || WP
 bac_resolution = 0.0
 bac_cov_increment = 0.01
 bac_min_pres_value = -10.0
 bac_max_pres_value = 7000000.0
 bac_time_delay = 0
 bac_high_limit = 6000000.0
 bac_low_limit = -5.0
 bac_deadband = 2.0
 bac_limit_enable = (1,1)
 bac_event_enable = (1,1,1)
 bac_notify_type = alarm
 bac_notification_class = 2
 bac_relinquish_default = 20.0 -V

Analog Value

Die required properties eines AV werden wie folgt definiert:

bac_units = 95

Die optional properties eines AV werden wie folgt definiert:

bac_description = analog value 1
bac_resolution = 0.0
bac_cov_increment = 0.01
bac_min_pres_value = -10.0
bac_max_pres_value = 7000000.0
bac_time_delay = 0
bac_high_limit = 6000000.0
bac_low_limit = -5.0
bac_deadband = 2.0
bac_limit_enable = (1,1)
bac_event_enable = (1,1,1)
bac_notify_type = alarm
bac_notification_class = 2
bac_relinquish_default = 20.0 -V

Ein lokaler AV könnte demnach z.B. so definiert sein:

[Y 2000.AV 1]
 name = Name vom AV 1
 query = pe
 writecache = yes
 bac_units = 95
 bac_description = analog value 1
 bac_resolution = 0.0
 bac_cov_increment = 0.01
 bac_min_pres_value = -10.0
 bac_max_pres_value = 7000000.0
 bac_time_delay = 0
 bac_high_limit = 6000000.0
 bac_low_limit = -5.0
 bac_deadband = 2.0
 bac_limit_enable = (1,1)
 bac_event_enable = (1,1,1)
 bac_notify_type = alarm
 bac_notification_class = 2
 bac_relinquish_default = 20.0 -V
 
 

Large Analog Value

Die required properties eines LAV werden wie folgt definiert:

bac_units = 95

Die optional properties eines LAV werden wie folgt definiert:

bac_description = large analog value 1
bac_resolution = 1.0
bac_cov_increment = 0
bac_min_pres_value = -10.0
bac_max_pres_value = 800000000.0
bac_time_delay = 0
bac_high_limit = 70000000.0
bac_low_limit = -5.0
bac_deadband = 10.0
bac_limit_enable = (1,1)
bac_event_enable = (1,1,1)
bac_notify_type = alarm
bac_notification_class = 2
bac_relinquish_default = 100.0 -V

Ein lokaler LAV könnte demnach z.B. so definiert sein:

[Y local.LAV 1]
 name = Name vom LAV 1
 query = pe
 writecache = yes
 bac_units = 95
 bac_description = large analog value 1
 bac_resolution = 1.0
 bac_cov_increment = 0
 bac_min_pres_value = -10.0
 bac_max_pres_value = 800000000.0
 bac_time_delay = 0
 bac_high_limit = 70000000.0
 bac_low_limit = -5.0
 bac_deadband = 10.0
 bac_limit_enable = (1,1)
 bac_event_enable = (1,1,1)
 bac_notify_type = alarm
 bac_notification_class = 2
 bac_relinquish_default = 100.0 -V

Integer Value

Die required properties eines IV werden wie folgt definiert:

bac_units = 95

Die optional properties eines IV werden wie folgt definiert:

bac_description = integer value 1
bac_resolution = 1
bac_cov_increment = 10
bac_min_pres_value = -100
bac_max_pres_value = 5000000
bac_time_delay = 0
bac_high_limit = 70000
bac_low_limit = -50
bac_deadband = 10.0
bac_limit_enable = (1,1)
bac_event_enable = (1,1,1)
bac_notify_type = alarm
bac_notification_class = 2
bac_relinquish_default = 100 -V

Ein lokaler IV könnte demnach z.B. so definiert sein:

[Y local.IV 1]
 name = Name vom IV 1
 query = pe
 writecache = yes
 bac_units = 95
 bac_description = integer value 1
 bac_resolution = 1
 bac_cov_increment = 10
 bac_min_pres_value = -100
 bac_max_pres_value = 5000000
 bac_time_delay = 0
 bac_high_limit = 70000
 bac_low_limit = -50
 bac_deadband = 10
 bac_limit_enable = (1,1)
 bac_event_enable = (1,1,1)
 bac_notify_type = alarm
 bac_notification_class = 2
 bac_relinquish_default = 100 -V

Positiv Integer Value

Die required properties eines PIV werden wie folgt definiert:

bac_units = 95

Die optional properties eines PIV werden wie folgt definiert:

bac_description = positiv integer value 1
bac_resolution = 1
bac_cov_increment = 10
bac_min_pres_value = 10
bac_max_pres_value = 5000000
bac_time_delay = 0
bac_high_limit = 70000
bac_low_limit = 20
bac_deadband = 10
bac_limit_enable = (1,1)
bac_event_enable = (1,1,1)
bac_notify_type = alarm
bac_notification_class = 2
bac_relinquish_default = 100 -V

Ein lokaler PIV könnte demnach z.B. so definiert sein:

[Y local.PIV 1]
 name = Name vom PIV 1
 query = pe
 writecache = yes
 bac_units = 95
 bac_description = positiv integer value 1
 bac_resolution = 1
 bac_cov_increment = 10
 bac_min_pres_value = 10
 bac_max_pres_value = 5000000
 bac_time_delay = 0
 bac_high_limit = 70000
 bac_low_limit = 20
 bac_deadband = 10
 bac_limit_enable = (1,1)
 bac_event_enable = (1,1,1)
 bac_notify_type = alarm
 bac_notification_class = 2
 bac_relinquish_default = 100 -V
bacnet_analog_dp.txt · Zuletzt geändert: 02.08.2019 10:56 von ppu